TCK600Y / TCK600SY CNC Mill-Turn Machines

CNC Mill-Turn Machines / Power-Turret Y-Axis Mill-Turn Centers

* BMT55 high-power turret, hard rail Y-axis, greatly ensuring rigidity
* 5.5KW spindle power motor with stronger milling ability

Request A Quote Download Brochure

Technical Specifications

Product Details Parameters

Key Features

Two Configurations: Single and Dual Spindle

The same 600 frame comes as the TCK600Y with a main spindle and as the TCK600SY with a main plus sub-spindle. Both run a 600 mm swing, 500 mm cutting length, ±50 mm Y travel and a 12-station power knife tower. The sub-spindle on the SY turns the back of the part in the same cycle instead of a second operation.

30 kW Main Spindle, 4500 rpm

The main spindle runs 4500 rpm at 30 kW. On the TCK600SY the sub-spindle adds 5000 rpm and 11 kW, which is enough for back-face work, parting and secondary turning without a separate machine.

65 mm Main Bore, 56 mm Sub Bore

The TCK600Y main spindle takes a 65 mm bore. The TCK600SY runs a 65 mm main bore with a 56 mm sub-spindle bore, which is the usual arrangement when the second end needs to hold the part after parting.

Y-Axis Off-Centre Milling

±50 mm of Y travel on the power turret covers cross holes, flats and slots. Cutting diameter is 460 mm on the single-spindle version and 350 mm on the dual-spindle version, because the sub-spindle takes up space on that side.

Primary Applications

Both versions target turned parts with milled features:

Valve bodies and hydraulic fittings with cross-drilled ports.
Connectors, couplings and fittings machined on both ends.
Automotive small parts where the back face carries real work.
Bar-fed families where a second operation is the bottleneck.

Why Choose the TCK600Y or TCK600SY?

Take the TCK600Y when the part needs one end turned and milled. Take the TCK600SY when the back of the part has real work — a bore, a thread, a face — and a second setup is costing you alignment and queue time. The dual-spindle version earns its price on volume; below a certain batch size the sub-spindle sits idle. Compare against the full mill-turn range or read how dual-spindle work is planned.

Product Parameters

Specifications	TCK600Y	TCK600SY
Max. turning diameter on bed(mm)	600	600
Max. cutting length(mm)	500	500
Max. cutting diameter(mm)	460	350
Spindle nose type	A2-6	A2-6 (5)
Main shaft hole diameter(mm)	65	56
Spindle speed range（r/min）	4500	4500
Sub-spindle speed range（r/min）	-	5000
Spindle motor power（KW）	30	30
Sub-spindle power (KW)	11	11
X-axis travel(mm)	280	280
Z-axis travel(mm)	550	550
Y-axis travel(mm)	±50	±50
Standard knife holder form	12 station power knife tower	12 station power knife tower
Machine size (mm)	3280L2085W2440H	2790L1900W1850H
Machine weight (KG)	4500	4800

Your concern

Our commitment

01Paid the deposit — production still isn't scheduled, and no delivery date is firm.

✓We confirm your production slot in writing before we start, and push each stage's progress to you live.

02Ordered cheaper elsewhere — only to find key components bought in and swapped.

✓Genuine components and in-house production, with inspection data shared before dispatch.

03Goods stalled at the border over documents, permits, or dual-use export control.

✓An in-house customs team and compliant dual-use filing — this is our daily work.

04Rolled bookings, surprise destination fees, machines damaged or rusted in transit.

✓Careful packing and logistics handling — and when something goes wrong, we tell you first.

05Machine down, no one reachable, spare parts months away.

✓24-hour response with traceable records, and a standard spare-parts kit in the crate.

06Chased for a decision — but the questions that matter are never answered.

✓We answer what you ask, and reach out only at key milestones — no spam, no chasing.

07Can't tell whether it's a real factory behind the quotes, or a middleman.

✓1,000+ staff and a 220,000㎡ factory — walk in and verify us in person, any time.

Get a Quote for Your Application

Send us your part drawing, material, blank form and monthly quantity. Our engineers will come back with the model, the chuck and turret configuration, and a quotation against your part rather than a catalogue.

Email sales1@handemocnc.com or WhatsApp +86 135 6320 3038. You can also upload a drawing through the drawing upload page or send an enquiry here.

FAQs

Frequently Asked Questions

What is the minimum order quantity for this machine?

We accept orders from 1 unit. Each machine is manufactured to order with full quality inspection, and lead time depends on the model and customization requirements. Contact our sales team for current lead times.

Can the machine be customized for my application?

Yes. Handemo offers customization including spindle options, CNC control systems (Fanuc, Siemens, GSK or others), automation integration, 4th/5th axis configurations, chip conveyors and special tooling. Tell us your workpiece requirements and we will propose the best configuration.

Do you provide installation and training?

Yes. We provide on-site installation and commissioning, operator training, and technical documentation. Remote video support is also available for troubleshooting and optimization after delivery.

What is your warranty policy?

Standard warranty covers the machine tool for 12 months from installation, including spare parts support. Extended warranty and preventive maintenance programs are available on request.

How do you ship the machine and how long does delivery take?

We export worldwide by container or break-bulk shipping with professional packing. Delivery time depends on the destination country and the model ordered. Our export team manages the full logistics process including customs documentation.

Can I visit the Handemo factory before ordering?

Certainly. Customers are welcome to visit our factory in Shandong, China for machine inspection, cutting tests and face-to-face discussion. We regularly host international customers from more than 150 countries.