TCK600S CNC Slant Bed Lathe

Key Features

600 mm Swing, 550 mm Cutting Diameter

The TCK600S swings 600 mm over the bed and cuts to 550 mm maximum diameter, with a 430 mm standard cutting diameter and 380 mm clearance over the cross slide. That puts it a size above the general-purpose 500 mm class without stepping into the heavy-duty range.

80 mm Bore, 70 mm Bar Capacity

An A2-8 spindle nose carries an 80 mm bore and passes 70 mm bar. Larger bar stock means fewer pre-cut blanks and less handling on parts that start from solid round material.

215 Nm Spindle Torque at 18.5/15 kW

Spindle output is 18.5 kW for 30 minutes and 15 kW continuous, with 215 Nm of maximum output torque. The 50–3500 rpm range gives low-end torque for steel and cast iron roughing and enough top speed for smaller-diameter finishing work.

300 mm X Travel, 550 mm Z Travel

X travel is 300 mm and Z travel 550 mm, with a 500 mm maximum cutting length. The machine weighs 4300 kg on a footprint of 2790 × 1900 × 1850 mm.

Primary Applications

The TCK600S suits turned parts that outgrow a 65 mm bore machine:

• Larger shaft and sleeve work in steel and cast iron.
• Hydraulic cylinder components and gland parts.
• Bearing housings and flange-type turned parts.
• Bar-fed production where 70 mm stock removes a sawing operation.

Why Choose the TCK600S?

Pick the TCK600S when the part needs more swing and more bar capacity than a 50 mm class lathe but does not justify a heavy-duty machine. The 70 mm bar capacity is usually the deciding number: if your blanks come in as bar, this machine removes a sawing step and a second handling stage. Compare it against the rest of the slant bed lathe range, or look at the precision models if tolerance is the driver rather than capacity.

Product Parameters

Get a Quote for Your Application

Send us your part drawing, material, blank form and monthly quantity. Our engineers will come back with the model, the chuck and turret configuration, and a quotation against your part rather than a catalogue.

Email sales1@handemocnc.com or WhatsApp +86 135 6320 3038. You can also upload a drawing through the drawing upload page or send an enquiry here.